Using Methods Of Beveling Machine 返回首页

The beveling machine works by clamping the glass with the front and rear pressure plates and driving its linear motion for grinding. There are two things to note in use:

1. The front and rear of the glass beveling machine and the guide rails should be lubricated frequently. Otherwise, the normal service life of the machine will be affected by the premature wear of the front and rear pressure plates and the working surface of the guide rail. Although some models have automatic lubrication devices, it is also necessary to check whether the lubrication lines are unblocked;

2. When the high quality beveling machine clamps the glass, the clamping force should be appropriate. Too loose affects the grinding quality. Too tight will increase the load of the machine. The glass beveling machine is prone to jitter and creep. It is easy to clamp when grinding thin glass. shattered glass. The clamping force can be tested on the machine with a slightly larger glass clamp, that is, the glass is clamped in the middle of the machine, and the glass beveling machine stops the hand with the force plate to move the glass, and the clamping force is adjusted to just move the hands. Time is appropriate.

beveling machine

上一篇:How To Clean Hydraulic Press

下一篇:Advantage Of Cold Elbow Machine

TEL:0086-139-31703233
Fax : 0086-317-6817833
Email:lmdzjxc@lmdzjxc.com
Address:Xiwang New District ,Mengcun Hui Autonomous County, Hebei province,China. sitemap google

Facebook Linkedin Pinterest 冀ICP备12017094号-2